Sooner or later a promoter asks, "How much stage do you need?" Most bands answer with a shrug or "we'll make it work." That's how a five-piece ends up with the drummer's floor tom hanging off the back of a 6-foot-deep stage.
The better answer is a number in feet, worked out from the footprint of each position. This guide gives rules of thumb for each position, then sizes for common lineups, then explains why depth runs out before width does.
The numbers here are rules of thumb, not standards. Gear and players vary. Use them to sanity-check a venue's stage before you advance it, then measure your own rig and put the real numbers on your plot.
A footprint is the floor area the gear takes, plus room to play it and room for a tech to get to it. These are typical numbers for a standard rig:
Width is easy to think about: count the people across the front line. Depth is what catches bands out, because a typical layout stacks positions from front to back. For a standard four-piece with drums upstage, the depth stacks like this:
That's 18 feet of depth for a comfortable layout. Plenty of club stages are 10 to 12 feet deep, so something has to give. Usually the drums come off the riser and onto the floor, the amps move beside the drummer instead of in front, and the wedges get tucked tight to the edge.
| Lineup | Tight but workable | Comfortable |
|---|---|---|
| Solo or duo, acoustic | 8′ × 6′ | 12′ × 8′ |
| 3-piece (guitar, bass, drums) | 14′ × 10′ | 18′ × 14′ |
| 4-piece (adds vocals or keys) | 16′ × 12′ | 20′ × 16′ |
| 5-piece with keys | 20′ × 12′ | 24′ × 18′ |
| 6 to 8 pieces with horns or BGVs | 24′ × 14′ | 32′ × 20′ |
Width × depth, in feet. "Tight" assumes drums on the floor and amps tucked beside the kit. "Comfortable" assumes an 8′ × 8′ drum riser and a walkway behind the backline.
Give two numbers, not one. "We need 20 by 16 to be comfortable and can play on 16 by 12 if the drums go on the floor." That tells the venue whether they're a good fit and tells them what you'll compromise on before load-in.
Then show it. A stage plot drawn to scale, with the stage outline in feet, settles the question faster than any email thread. If your drummer needs the full 8 feet of riser, it's on the drawing. If the keys player's two-tier stand sticks out past the front line, everyone can see it.
StageBuilder Pro draws the stage at real size in feet and places gear at real size too, so you can test whether your lineup fits before you get there. Set the stage to the venue's dimensions, drop in your band (or start from the 3-, 4- or 5-piece templates), and look at it from overhead. If the floor tom is hanging off the back edge, you'll see it now rather than at soundcheck. A free account exports a dimensioned overhead plan as a PDF that you can send with the advance.
About 16 by 12 feet is tight but workable with the drums on the floor. About 20 by 16 feet is comfortable with an 8 by 8 drum riser and a walkway behind the backline. These are rules of thumb; measure your own rig.
8 by 8 feet is the most common size, usually built from two 4 by 8 stage decks. Bigger kits or double-kick setups often need 8 by 10 or more.
For a band with drums on a riser, about 18 feet of depth is comfortable: 2 feet of wedges, 4 feet of front line, 2 feet in front of the riser, an 8 foot riser and a 2 foot walkway behind it. Many club stages are only 10 to 12 feet deep, which is why the drums often go on the floor.
Small club stages are often somewhere around 12 to 16 feet wide and 8 to 12 feet deep. That fits a three- or four-piece band if the drums play from the floor and the amps sit beside the kit.
For what else belongs on the drawing, see the complete stage plot guide and the drum riser guide.
Draw the stage at the venue's real size, drop your band on it, and find out whether it fits before load-in.
Open StageBuilder Pro →